PRODUITS MOUSSANTS

USE Foaming agent for air drilling. Removes cuttings, stabilizes the hole walls. Prevents marls and clays from swelling and sticking. FORM Liquid form product. Available in 20 and 25 Kg cans.

ADVANTAGES

• Little storage and low concentrations: 3,0 to 7,0 litres/M³ of water, to obtain high foaming properties.
• Easy to mix: liquid form.
• Stabilize the hole walls in clays, marls and poorly consolidated formations.
• Non toxic, non polluting, biodegradable product.
• It is possible to increase the hole stability in unconsolidated layers by adding POLYCOL 60 S or POLYCOL 60 LS to the mixture.
• For fresh and salted water.

COMPOSITION
Blend of tension-active foaming agents and specific additives.

INSTRUCTIONS FOR USE
And 3 to 7 litres of POLYMOUSSE/ M3 of water.
Pour POLYMOUSSE directly in water.
In unconsolidated formations, first make a drilling mud (1 Kg POLYCOL 60 S or 2 litres POLYCOL 60 LS/ M³ of water) and then add 3 to 7 litres of POLYMOUSSE.
The concentration depends on water inlet in the hole.
Inject 10 to 30 litres of mixture through the drill rods. Then add air while drilling.
In unconsolidated layers, sometimes it is necessary to make an injection every meter. So it is better to inject the mixture through a pump.
POLYMOUSSE is compatible with nearly all kinds of polymers for drilling muds and foaming agents.